Firmware Galaxy Z Flip SM-F700W N770FXXU3BTE5 XAC

Firmware (Stock ROM) Galaxy Z Flip SM-F700W N770FXXU3BTE5 XAC Flash File for repair damage to software such as Bootloop, Forgot pattern / password lock screen, FRP, Brick, Root or twrp failed, system error, application stopped etc.

Model name Samsung Galaxy Z Flip
Model SM-F700W
Version Android 10
Country Canada (XAC)
Build date 06 May 2020
Security Patch Level 2020-05-01
Product code XAC
PDA F700WVLU1ATD8
CSC F700WOYV1ATD8
File Name SM-F700W F700WVLU1ATD8_F700WOYV1ATD8_XAC.zip
Type: Compressed Archive
Size: 5 GB (5,248,599,037 bytes)


Download (Google Drive)

INSTRUCTIONS (5 FILES)

1. Download Odin v3.14.4
2. Extract the firmware file you just downloaded. You should get 5 files:
AP (System &Recovery)
BL (Bootloader)
CP (Modem / Radio)
CSC_*** (Country / Region / Operator)
HOME_CSC_*** (Country / Region / Operator)
3. Add each file to its respective field in Odin v3.14.4. Use CSC_*** if you want to do a clean flash or HOME_CSC_*** if you want to keep your apps and data.
4. Reboot your phone in Download / Odin mode (make sure your device is off) with the following button combo:
POWER + VOLUME DOWN + BIXBY
Other options in case first option did not work or isn’t possible.
Option 2 VOLUME DOWN + VOLUME UP then USB cable
Option 3 POWER + VOLUME DOWN + VOLUME UP
Option 4 POWER + VOLUME DOWN + HOME BUTTON
Option 5 (Note9) USB cable + VOLUME DOWN + BIXBY
Option 6 (Note10) POWER + VOLUME UP
5. Once in download mode, connect your phone to the PC, preferably using the original USB cable you got with your phone. Odin should detect your device and a BLUE box will show up with the COM port number. (Be sure, the SAMSUNG-drivers are installed on your PC!)
6. Do NOT tick any extra boxes. The only options to be ticked are F.Reset Time and Auto-Reboot.
7. Click the start button, wait for Odin to say ‘PASS’ in a GREEN box. Once the flash is complete, your phone will reboot, and you can disconnect your phone from the PC.

INSTRUCTIONS (1 FILE)

1. Download Odin v3.14.4
2. Extract the firmware file you just downloaded. You should get 1 file:
AP (System &Recovery)
3. Add MD5-file in AP-field in Odin
4. Reboot your phone in Download / Odin mode (make sure your device is off) with the following button combo: POWER + VOLUME DOWN + BIXBY
Other options in case first option did not work or isn’t possible.
Option 2 VOLUME DOWN + VOLUME UP then USB cable
Option 3 POWER + VOLUME DOWN + VOLUME UP
Option 4 POWER + VOLUME DOWN + HOME BUTTON
Option 5 (Note9) USB cable + VOLUME DOWN + BIXBY
Option 6 (Note10) POWER + VOLUME UP
5. Once in download mode, connect your phone to the PC, preferably using the original USB cable you got with your phone. Odin should detect your device and a BLUE box will show up with the COM port number. (Be sure, the SAMSUNG-drivers are installed on your PC!)
6. Do NOT tick any extra boxes. The only options to be ticked are F.Reset Time and Auto-Reboot.
7. Click the start button, wait for Odin to say ‘PASS’ in a GREEN box. Once the flash is complete, your phone will reboot, and you can disconnect your phone from the PC.

Leave a Reply

Your email address will not be published. Required fields are marked *